Find out how to login to your 10.0.0.1 Router and set up your Piso Wifi with the default username and password. Others to access admin settings, WiFi network.
What is 10.0.0.1 IP Address?
10.0.0.1 IP address is unique in that it can be used several times. It is part of the 24-bit private IP address block used for local area networks (LANs). Private IP addresses cannot be routed across the WWW, unlike public IP addresses, although this does not render them useless.
The IPv4 communications protocol, which is one of the basic protocols of standards-based internet-working methods, contains around 4 billion IP addresses. On April 15, 2011, the first regional Internet Registry ran out of freely granted IPv4 addresses.
Network administrators and internet service providers have been remapping one IP address space into another and substituting private IP addresses such as 10.0.0.1 for public IP address using various ways.
It will take some time for the IPv4 communications protocol to be completely replaced by its successor, Internet Protocol Version 6, or IPv6 for short. IPv6 accounts for less than 25 percent of WWW traffic at now.
How to login to 10.0.0.1 Router?
To login into Admin Panel using 10.0.0.1, follow these steps:
- Verify that the device you wish to setup is connected to the network you wish to configure. This connection can be made via either an Ethernet cable, or a wireless network (Wi-Fi).
- Launch any web browser (Firefox, Chrome, Opera, Edge, etc.).
- Type 10.0.0.1 in the browser’s address box and hit Enter. Following this procedure, you will be redirected to http://10.0.0.1.
- Enter your username and password on the resulting login page.
- After logging in, you can access the admin.
Forgot IP Address Username and Password
Accessing the admin interface of your router or modem is possible with the default login and password. You can also log in by resetting your device if you cannot remember the password you created. Follow the procedures below to achieve this objective or default gateway.
- Verify that the IP address, username, and password are written on the device. In the absence of this indication, consult the device’s handbook.
- If you cannot locate the login credentials, you can consult the default settings list for routers. This page contains the default login credentials for the most popular brands and models.
- In the event that you cannot recall your password, you must reset your device. When you reset your device, all configuration settings will be wiped clean. To accomplish this, you must press and hold the device’s reset button with a sharp object until the lights flash. This takes approximately 4-5 seconds.
Change WiFi Network Name and Password
- Open the Admin Tool at http://10.0.0.1 to log in.
- Pick Gateway from the menu on the left, then Connection, and finally Wi-Fi.
- Your WiFi network’s name (SSID) can be found under Private Wi-Fi Network. Keep a record of it.
- You may modify your network name by clicking Edit on the right.
- Your Gateway model determines which choice you see. In the event that you see two network names—one for the 2.4 GHz band and one for the 5 GHz band—click Edit on each one and type in a new name.
- You might need to update your WiFi network name in a different method if you can’t see these options. For further information, go to the 10.0.0.1 Piso Wifi Pause Time Admin Login – Wifi Network
- Check the box next to Show Network Password to view your network password. Keep a record of it. In the Network Name and/or Network Password fields, enter the new information for your WiFi, then click SAVE SETTINGS.
You may join your phone, laptop, tablet, and any other device to your network now that you have the name and password for your WiFi network. With your new network name and password, you must sign into your network on each device once more.
Default Router Login and Password
Each router manufacturer utilizes a unique default login and password. It is beyond the scope of this page to cover all possible usernames and passwords; however, the following are the ten most common:
|LPB Piso WiFi||adminadministrator||123456789admin1234|
Some Common Mis-Type Of Router IP Addresses
You should be cautious while entering IP addresses; the following list of typical typos will assist you in avoiding the erroneous connection.
|🗸 Correct Type||x Incorrect Type|
|10.0.0.1 admin||10.0.0.0.1 admin|
|10.0.0.1 login||10.0.0.0.1 login|
What If You Can’t Connect?
10.0.0.1’s response time was excessive.
If you are still experiencing this problem, there may be a problem with the router’s hardware or the wire you are using. Looking for any loose connections and restarting your router are two popular fixes for this.
Incorrect IP Address
Make sure you type the IP address correctly because it is frequently entered incorrectly as 10.0.0.0.1, which is an invalid URL. The right IP address is 10.0.0.1.
The browser will simply direct you to the Google search results page or the default search engine you set if you write 10.0.0.0.1. Even starting the URL with https:// will invalidate it.
Incorrect username and password
A router’s password prevents unauthorized users from modifying your settings and perhaps jeopardizing your security. The default usernames and passwords should be listed on a sticker someplace on your router. We’ve included the most popular username/password combinations below.
Unresponsive gateway device
Technical mistakes are the cause of this issue. Restart your router and check to see whether the issue is still present.
Your device’s IP address could not be 10.0.0.1 because of this, which occurs on wireless networks when IP address is routinely issued to clients.
Visit powerpacplus.org to find common solutions and self-help options, troubleshoot or manage your account and more.