192.168.0.254 – Default Login IP Address| Username & Password

In this article, we’ll go over the fundamentals of logging onto 192.168.0.254, such as the IP address, gateway credentials, and login procedures. It also includes solutions to common login problems, advice on configuring a wide range of routers, and much more besides. By the time you reach the end of this piece, you will know everything there is to know about the 192.168.0.254 IP address.

What is 192.168.0.254?

192.168.0.254 is also the IP address of the local network like 192.168.0.1, 192.168.254.254, etc. Private or port 192.168.0.254 is the address of the router that network-connected computers will use to transmit data requests over the Internet. This address is also known as LAN IP, Intranet IP, or Private IP.

Additionally, your router has a public IP address. Your ISP and the websites you visit utilize your public IP address to obtain information about the websites you visit, which is subsequently forwarded to your router. Then, data is sent back to the desktop using the private IP address.

Multiple IP addresses may be used as a router’s login address, but 192.168.0.254 is one of them. It is important to note that the default IP access addresses of different router brands vary, and that users may often change the default address.

Easy steps to login 192.168.0.254

To access the Admin Panel using 192.168.0.254, you must first ensure that your router login/default repeater’s gateway address is 192.168.0.254. The default IP address is written on a sticker on the rear of the router.

Follow the procedures following to access the administration console through 192.168.0.254:

1. On your computer, launch a web browser, such as Google Chrome, Mozilla Firefox, or another.
2. Type the address below: After entering http://192.168.0.254 or 192.168.0.254, press Enter
3. You will be sent to the login page for your wireless router or wireless repeater. Here, you will be required to insert your login account and password. The default username and password are displayed on a label located on the rear of the router.
4. Type the login username (admin) and password (admin), then click the Log In button.

Note: If the username or password is wrong, you can refer to the list below in the Default Router models, Username Login and Password combination section

5. You have been successfully logged into the Admin Console of your wireless router/repeater. You may make all necessary adjustments to the settings from this location.

Note: If the default IP address is not 192.168.0.254, then this IP address will not function; you will need to manually write the default IP address. Additionally, you must link your computer to a Wi-Fi Router or Wi-Fi Repeater. You may accomplish this by connecting directly with an Ethernet wire or by connecting to the router’s Wi-Fi network.

How to change the Wi-Fi Network SSID?

If you wish to modify the Wi-Fi Network SSID, simply follow the instructions provided below:

1. Connect to your Wi-Fi router’s Admin Console.
2. After logging in, navigate to Home > Wireless.
3. Look for the Wi-Fi Network Name/SSID column here. There you will discover the SSID of your current Wi-Fi network.
4. Input the new Wi-Fi SSID into the field provided.

5. Click Apply to save your changes.
6. After the Wi-Fi Router reboots, the SSID will be changed, and you will be required to rejoin to the Wi-Fi Network using the new SSID.

How to change the Wi-Fi Network Password?

If you’d want to change the password for accessing the Wi-Fi network, you can do so by following the steps outlined below:

1. Utilize the aforementioned way to access the Admin Console of the Wi-Fi Router.
2. From the homepage, access the Wireless section.
3. Look for the WiFi Password box in the section under Security.
4. Type the new WiFi Password in the provided space.
5. To save the changes, click Apply.
6. The Wi-Fi Network’s password will be changed, and you will be able to connect with the new password.

Default Router models, Username Login and Password combination

These are the most common usernames and passwords for different models which use 192.168.0.254 as the default router IP address:

Router Manufacturer	Username	Password	Router Manufacturer	Username	Password
3Com	n/a	admin	ACC	netman	netman
3Com	admin	n/a	ACCTON	n/a	0
3Com	root	!root	Aceex	admin	n/a
3Com	adminttd	adminttd	Aceex	admin	epicrouter
3Com	n/a	PASSWORD	Actiontec	n/a	n/a
Bausch Datacom	admin	epicrouter	ADC Kentrox	secret	n/a
Bay Networks	user	n/a	Adtran	n/a	n/a
Bay Networks	Manager	n/a	AirLink+	admin	admin
Bay Networks	Manager	Manager	Aiway	0	n/a
Belkins	n/a	n/a	Allied Telesyn	root	n/a
Belkins	admin	n/a	Allied Telesyn	Manager	Friend
Benq	Aadmin	admin	Allnet	admin	admin
Bintec	admin	bintec	Ambit	user	user
Boson	n/a	n/a	Ambit	root	n/a
Broadlogic	admin	admin	Ambit	admin	password
Broadlogic	webadmin	webadmin	Amitech	admin	admin
Broadlogic	installer	installer	Apple	n/a	n/a
Buffalo	root	n/a	Arescom	n/a	atc123
Cable & Wireless	Admin	1234	Arescom	dsladmin	n/a
Cabletron	netman	n/a	Ascend	admin	ascend
Cabletron	n/a	n/a	Ascend	n/a	ascend
Canyon	Administrator	admin	Asmack	admin	epicrouter
Canyon	admin	1234	ASUS	admin	admin
Cayman	Any	n/a	AT&T	admin	admin
Cisco	cisco	cisco	AT&T	admin	12345
Cisco	n/a	san-fran	Avaya	root	root
Conexant	n/a	admin	Dell	admin	admin
Conexant	n/a	epicrouter	Digicorp	n/a	BRIDGE
IBM	n/a	ascend	Digicorp	n/a	n/a
Infosmart	admin	0	D-Link	n/a	admin
Intel	admin	hello	D-Link	user	n/a
Intel	n/a	babbit	D-Link	admin	n/a
Intel	NICONEX	NICONEX	D-Link	n/a	year2000
Ipstar	admin	operator	D-Link	Admin	Admin
JAHT	Admin	epicrouter	D-Link	admin	n/a
Linksys	Administrator	admin	D-Link	n/a	1234
Linksys	admin	admin	E-Con	admin	epicrouter
Linksys	n/a	admin	Edimax	admin	1234
Livingston	!root	n/a	Efficient	login	admin
MacSense	admin	admin	Efficient	n/a	hs7mwxkk
Medion	n/a	medion	Efficient	admin	admin
Microsoft Broadband	admin	admin	Elsa	n/a	cisco
Microsoft Broadband	n/a	admin	Ericsson	netman	netman
Mikrotik	admin	n/a	E-Tech	n/a	admin
Motorola	cablecom	router	E-Tech	admin	epicrouter
Motorola	admin	password	Flowpoint	n/a	admin
Motorola	admin	motorola	Flowpoint	n/a	password
Netgear	admin	password	Fujitsu Siemens	n/a	connect
Netgear	admin	password	Gateway	admin	admin
Netgear	n/a	1234	T-Comfort	Administrator	n/a
Netgear	admin	1234	TP-LINK	admin	admin
Nokia	m1122	m1122	Teledat	admin	1234
Olitec	admin	admin	Telekom Malaysia	ZXDSL	ZXDSL
Olitec	admin	adslolitec	Telekom Malaysia	ADSL	expert03
Pentagram	admin	password	Teletronics	admin	1234
Pentagram	n/a	pento	UNEX	n/a	password
Pirelli	admin	mu	US Robotic	admin	admin
Pirelli	user	password	US Robotic	admin	n/a
Pirelli	admin	microbusiness	US Robotic	root	12345
Siemens	superuser	admin	US Robotic	n/a	12345
Siemens	n/a	sitecom	Westell	admin	sysadmin
Siemens	admin	admin	X-Micro	super	super
SmartSwitch	admin	n/a	X-Micro	1502	1502
SMC	n/a	n/a	Xyplex	n/a	access
SMC	admin	admin	Xyplex	n/a	system
SMC	admin	smcadmin	Yakumo	admin	admin
SMC	n/a	smcadmin	Zyxel	admin	admin
SMC	admin	barricade	Zyxel	admin	1234
SMC	cusadmin	highspeed	Zyxel	n/a	1234
SMC	n/a	0	Zyxel	n/a	n/a
Speed Touch	Administrator	n/a
Speedstream	admin	admin

Connection Issues when logging in

Mispell IP Address

People frequently mistype the IP address, entering 192.168.o.254 instead of 192.168.0.254. Some users forget to include the zero and enter 192 168 254 while attempting to access the router’s login page.

Wrong Admin Username and Password

The most typical difficulty encountered by users connecting to the 192.168.0.254 IP address is a lack of knowledge of the necessary admin username and password. As previously established, “admin” is the default login and password for the majority of routers. 

However, there are more conceivable combinations of admin username and password that you should be aware of. You can see the list above in the Default Username Login and Password combination section.

Wrong IP Address

It is also conceivable that your router’s default gateway IP address is not 192.168.0.254. The IP address 192.168.0.254 belongs to a 16-bit block of private IP addresses that contains 65,535 more IP addresses. 

Instead of attempting one private IP address after another, which would take an eternity, we highly advise you to follow the steps below to acquire the internal IP of your router:

Windows

1. Open the Start menu.
2. Enter “cmd” and hit Enter.
3. Enter “ipconfig” and look for “Default Gateway.”

macOS

1. Navigate to your Applications folder.
2. Then, in Utilities, double-click Terminal.
3. Enter “netstat -nr | grep default” into the command line.

Router Not in Range

If you continue to experience connection troubles, you should ensure that you are within range of your router NetSpot, an easy-to-use software application for wireless network evaluation, scanning, surveys, and Wi-Fi coverage and performance analysis, is the most effective method for achieving this objective.

With NetSpot, you can quickly and easily determine if the region you’re connected from has a strong Wi-Fi signal emanating from your router, as well as identify any nearby Wi-Fi networks that may be interfering with your signal.

Reset and Troubleshoot

Follow these instructions if you cannot log in to the router dashboard or cannot access the 192.168.0.254 login page:

1. Make sure you type 192.168.0.254 or http://192.168.0.254 and not an error like 192.168.o.254 or 192 168 254. Then, you must ensure that the device is linked to the router.
2. Utilize a hard reset. Find a little button on the back of the router and press it with anything like a pin. When the light flashes, the gadget has been reset to factory settings, and its credentials will be same as before.

If you follow the instructions in this blog post, you should have no trouble utilizing the 192.168.254.254 admin login. You should also be able to adjust your network settings and router using the admin panel. If you prefer to attempt a different login IP, TP LINK is viable alternatives.

If you need help, please fill out the form below, and https://www.powerpacplus.org/ will react as soon as possible.

FAQs