192.168.10.1 is an IP address used to access the router’s administrative panel to update the WiFi password, SSID, and default routers settings.
What is IP address 192.168.10.1?
192.168.10.1 is the local IP address (also known as the private network IP, intranet IP) of your router. Computer devices connected to the network will use this address to send data requests over the internet. Additionally, your router has a public IP address.
Your ISP and any website you visit utilize the public IP address to relay information from the website you visit to your router, which then sends that information back to your desktop using the private IP address.
192.168.10.1 is one of the more often used IPs that routers can use as login addresses. It should be noted that different router brands have different default IP access addresses, and users can typically change the default address.
How To Login To 192.168.10.1?
Follow these steps to login the admin panel using 192.168.10.1:
- Go to http://192.168.10.1 on your browser.
- There will be a login page. Type in the admin password and login information. (Username: admin/ Password: admin or password)
- You will be logged into your router’s admin page.
Where is the login page for it?
192.168.10.1 All you need to do to access the login page for your admin panel is type http://192.168.10.1 into your browser.
You may simply reset the modem to factory defaults if you are unsure of your password or run into an erroneous password match.
Resetting the Username and Password
Change WiFi password on 192.168.10.1
To change your WiFi password using 192.168.10.1, follow these steps:
- Log into the admin section of your router open a web browser.
- Then click Security → Password Settings → Wireless Settings.
- “WPA2-PSK” network encryption should be chosen.
- In the password field, type your new password.
- To save the changes, button Apply.
Rename the network (SSID)
Follow these procedures to update your network name (SSID):
- Log in to the settings page for your router.
- Visiting WiFi Wireless Settings
- Click to Basic Settings.
- In the SSID area, enter the new network’s name.
- Apply is selected to save it.
Note: Make that you are connected to the internet network, either wirelessly over WiFi or using an ethernet connection, before logging in.
How is it Used?
With around 26 billion devices connecting to the internet and over 4 billion IPv4 addresses available, it is not difficult to deduce that not every device can have its own IP address.
The Internet Assigned Numbers Authority (IANA), a nonprofit private American corporation that regulates global IP address allocation, devised an inventive solution to avoid the potentially fatal implications of IPv4 address exhaustion: private IP addresses.
There are actually three private IP address blocks or ranges:
- 24 bits block: 10.0.0 to 10.255.255.255 (16,777,216 addresses in total).
- 20-bit block: 172.31.255.255 — 172.16.0.0 (1,048,576 addresses in total).
- 192.168.0.0 to 192.168.255.255 is a 16-bit block (65,536 addresses in total).
Private IP addresses are not unique, in contrast to public IP addresses. For instance, a device with the IP address 192.168.10.1 can be present in every single private network in the world.
A collision of IP addresses would result if more than one device in the same network had the 192.168.10.1 IP address.
Default Username and Password List
You might be wondering which router brands utilize 192.168.10.1 as the default login IP and what the default username and password are after reading all the information above. This website compiles the standard login credentials for well-known router manufacturers and models available on the market.
Numerous distinct IP addresses, such as 192.168.1.1, 192.168.0.1, PTCL, or 192.168.2.1, were used to access the management panel of your wireless router, travel router, or DSL wireless router. Default Gateway IP is another name for this type of router IP address.
Because there is typically only one circumstance in which you need the IP 192.168.10.1, not many individuals are familiar with their router’s configuration. This is happening as a professional completes the setup process.
The usernames and passwords for routers that utilize 192.168.10.1 as the login address are shown below. The data is merely for use as a point of reference; we have examined them in accordance with the availability rate.
List Default Login Details Of Most Popular Router
Incorrect IP Address
IP addresses are difficult to type. A separate page loads instead of loading at all if you enter an incorrect digit or an undesirable character. Simply copy and paste the IP address into the address box to prevent making this error.
You can only do this to make sure you entered the right IP address.
If you are still unable to connect to http://192.168.10.1, it’s possible that your router isn’t functioning properly. If one of these intricate devices’ components is missing, difficulties could result. Get in touch with the manufacturer of your router to rule out this possibility. But be aware that not all manufacturers utilize the IP address 192 168 10.1.
No physical connection
Before you can use the 192.168.10.1 IP address to access the admin interface on many routers, you usually need to connect them physically using an Ethernet wire. Simply attach an Ethernet cable to your computer’s other end and the router’s other end.
It is straightforward and quick to access the router using the default login IP address and URL, but if you reset the router and encounter any problems accessing the IP address, be sure to have a backup configuration file to restore after the factory reset of the device. Try 192.168.0.1, 192.168.1.1, 10.0.0.1, and other commonly used login IP addresses by various brands if the default login of 192.168.10.1 is not working for you before resetting the router.
PowerPacPlus hopes the above content can be of help to you and the data about it will also help you to find the way to setup IP address and router login more easily. Skip to content to get more information about routers.