192.168.101.1 – Default Login IP Address| Username & Password
This page gives a brief description of the credentials that go with the login IP address, which is 192.168.101.1. The article describes how to use this IP address to view the router’s configuration settings and how to resolve any potential problems.
The post also includes advice on how to safeguard your router by changing the username login and password. Finally, it offers some general information about IP addresses, such as what they are and where to look for them.
What is 192.168.101.1?
192. 168. 101. 1 is an private IP address, also known as a private network address. It is one of the most commonly used addresses for local area networks (LANs) like 192.168.100.1, 192.168.10.1 IP address and 192.168.1.1, and it is typically used to set up home or small office networks.
This address allows multiple devices such as computers, printers, and other peripherals to be connected to the same network and communicate with each other.
The 192. 168. 101. 1 private address is usually assigned to a router or wireless access point, which acts as the gateway between the LAN and the internet. In order to gain the network, all devices must have the correct settings in order to gain connection to the router.
Easy steps to login 192.168.101.1
Follow the steps below to get in to the 192.168.101.1 router’s admin panel:
- Launch a web browser on your computer or linked device.
- Enter the address http://192.168.101.1/ or 192.168.101.1 in the address bar.
- You will be sent to the router’s login screen, where you will be prompted to enter your username and password in order to proceed. The user name and password may be found on a label printed on the router’s rear.
- Enter the username and password then Sign In.
- Assuming that the username and password are right, you will be logged into the router admin interface. Here, you may view all of the settings for the router and wireless network.
Note: Before you may login to the admin interface through 192.168.101.1, you must ensure that your router’s IP address is 192.168.101.1. Occasionally, the gateway address for routers is not 192.168.101.1; therefore, you cannot log in anything using this IP address. Additionally, you must ensure that your computer or device is directly linked to the computer. To connect the router, you may use an Ethernet cable or its wireless network.
How to change Wireless Network SSID and Password?
To change Wi-Fi Network SSID and Password, you have to be aware that the router admin interface enables access to the management of several parameters, including Wi-Fi Network SSID and Wi-Fi Network Password. If you desire to change the Wi-Fi SSID and password, you can do it using the router’s administrative interface, as follows:
Change Wireless Network SSID
- Initially, use the aforementioned approach to get into the router admin interface.
- After logging in, the Home page menu will appear. Go to the Wireless section by clicking here.
- Find the wireless area for Wi-Fi Network SSID/Name.
- Input the new Wi-Fi Network SSID into the field provided.
- To save modifications, press Apply.
- The modifications will be saved, and the Wi-Fi network’s SSID will be modified. With the new SSID, you may then gain connection to the Wi-Fi network.
Change Wireless Network Password
- The initial step is to log in to the router’s admin panel. Method is described above.
- Once you have logged in, move to the Wireless Section.
- Select WPA or WPA2 as the encryption protocol.
- In the Wi-Fi Network Password/Passphrase area, enter your new Wi-Fi network password.
- To save modifications, press Apply.
- The modifications will be stored and the Wi-Fi network’s password will be modified. Using the new password, you may reconnect to the Wi-Fi network.
Top router brands that use 192.168.101.1 as their default login admin IP Address
192.168.101.1 is often the default gateway address for Linksys routers, however this might change based on the model. Make an attempt to log in using 192.168.101.1, http://192.168.101.1, or https://19.168.101.1.
Default Username Login, and Password combination
Below is the list of the most frequent used usernames and passwords for IP address 192.168.101.1:
| Username | Password |
| admin | admin |
| admin | 1234 |
| admin | password |
| root | root |
| admin | na |
The reasons and solutions for 192.168.101.1 unable to access the router’s administration page
As stated previously, 192.168.101.1 is the login IP for controlling router settings; thus, what should you do if 192.168.101.1 fails to load the router’s login page? Here, we will discuss the reasons and solutions for 192.168.101.1’s inability to login to the router’s admin panel when using a computer to set up a router. If you are experiencing comparable issues, you can try the following solutions.
Misspell the IP address
People frequently make the error of entering an additional number in the IP address; rather than 192.168.101.1, they put 192.268.101.1.1. This is due to:
- With so many 1s in the IP, people may become confused at first look.
- Numerous Linksys routers utilize 192.168.1.1 as the default gateway, thus consumers become puzzled when they see a 100 in the IP address.
Improper local IP of the computer
If you have already configured the local IP address of the computer, but with incorrect settings, you will be unable to log in to the router. The answer is to configure the computer’s IP address to be acquired automatically. Using the Windows 10 operating system as an example, you will learn how to configure the local IP address for automatic acquisition.
- Right-click the Windows 10 “Start” button, then pick “Network Connections” and launch it.
- To login “Properties,” right-click “Local Area Connection” and select “Properties.”
- After selecting “Internet Protocol Version 4 (TCP/IPv4),” press “Properties.”
- Select “Obtain an IP address automatically” followed by “Obtain DNS server address automatically” and then hit “OK.”
- If the computer’s IP address has never been specified and is received automatically by default, you can disregard this issue.
Router connection problem
Connect the PC, modem, and router as illustrated below using the network cable:
Link the external telephone line or fiber optic cable to the modem before using the network cable to connect the modem to the WAN port of the router. WIFI enables the direct connection of a laptop or mobile phone to the router. If it is a desktop computer, a network cable must be used to connect the computer to the router’s LAN port.
Network cable problem
If there is an issue with the network cable used to connect the computer to the router, such as a defective cable or an old crystal head, then 192.168.101.1 will fail to launch the router’s configuration interface, so you must ensure that the cable is functional.
If you have extra cables at home, you may replace the damaged cable with a good one, plug it in securely, and then attempt again to access the router’s configuration page using 192.168.101.1. Moreover, if there is a problem with the network cable, the network icon in the lower right corner of the computer will appear incorrectly.
You may either see the icon or use the CMD command “ping 192.168.101.1” to determine whether the connection between the PC and the router is okay.
URL input error in browser
People are accustomed to putting 192.168.101.1 in the search box on the homepage of many browsers (such as Google, Bing, Baidu, etc.), which is not the correct way to access the login page.
The right place to enter 192.168.101.1 is in the browser’s address bar, which is located at the top of the browser where the URL is displayed. The proper location is illustrated in the image below:
Router setup problem
Some people erroneously assume that the default login IP address for all routers is 192.168.101.1. However, the default login IP address might vary depending on the router manufacturer and type.
If your router’s IP address is not 192.168.101.1, you will not be able to access the router’s configuration page using this IP. You must thus validate that the IP address of your router is 192.168.101.1, which may be found in the default IP address (URL) information on the router’s label.
Alternately, the router’s default IP address may have been changed. Some users may first adjust the default address of the router to strengthen the router’s security, and after the modification, 192.168.101.1 will no longer function; the new login address must be used instead. To access the actual login address of the router, take these steps:
- To launch Network Connections, right-click the Windows 10 “Start” icon and select “Network Connections.”
- To open “Status,” right-click “Local Area Connection” and select “Status.”
- Select “Details”
- Determine the IP behind “IPv4 Default Gateway,” which is the actual login IP of the router.
Reset and Troubleshoot
The modem just has to be reset. Simply pressing the reset button (often found on the underside or back of the modem) can do this. Holding this little button (you might need a toothpick) for 20 seconds will reset your modem to its factory settings.
Remember that resetting your modem will result in a broken Internet connection. Therefore, it is recommended that you seek the advice of a professional. We suggest you seek the advice of an expert if you feel you lack the necessary expertise.
In conclusion, 192.168.101.1 is an important IP address for accessing your router’s configuration settings and troubleshooting any issues that arise. While it is essential to use the default login IP address, username, and password to access the router’s settings, it is also wise to change the default administrator credentials in order to keep your network secure.
Be sure to use this article as a resource when addressing any issues related to IP addresses or router login. If you have any questions or need additional help, feel free to contact https://www.powerpacplus.org/ or leave your comments in the section below!
