How To Make A Nail File Without Sandpaper On Wood – DIY
How to make your own files with no sandpaper. Sand or other material kinds are suitable, which we mention here for your nail care. Try to make one in our list and enjoy your time.
The 2 Best DIY Nail File Without Sandpaper
You can easily make your own filers at home with just a few materials. First, you’ll need to purchase tongue depressors. Cut-off one of the sides so that it’s nice and flat, then trim away any excess. Simply press the tongue depressor firmly on the back one side of sandpaper until the two materials are firmly attached. And that’s it! You can now make a homemade nail filer that works just as well as any store-bought version.
Or make two recommend ways update below:
1. Use Semolina/ Rawa/ Sooji – Grit Nail File
If you’re in need of a manicure filer, a grit nail file, but without sandpaper on hand, never fear! There are plenty of other materials you can use to get the job done. One material that works great is semolina.
Semolina is a type of flour made from durum wheat, and it’s pretty coarse. This makes it perfect for filing down fingernails. Just pour a small amount into a bowl and dip your manicure in, moving them around until they’re smooth.
When you’re finished, wash your hands thoroughly to remove the semolina. Your manicure will be filed down and ready for whatever you have planned next!
Also read on make cloth face masks
2. Use White Sand
If you’re in a pinch and need to nail file, don’t worry! You can make a manicure file.
To make your fingernail filer, follow these steps:
- Start by pouring it into a container.
- Then, take a piece of cardboard and cut it into a rectangular shape.
- Next, use tape to attach the cardboard to the top of the container.
Hold the cardboard down with one hand and use your other hand to rub your manicure. Rub in whatever direction you want until your fingernails are nice and flat.
When you’re done, brush off and wash your hands with soap and water.
What Can I Use Instead Of Sandpaper On Wood?
This material is inexpensive and available at most hardware stores. It is available in sheets, power tool tapes or in block form for more demanding work.
Substitute one may be sought for environmental reasons or when conventional one is not available.
You might be interested in make a fluted lampshade or make lion backpacks with cricut for kids
Grinding Blocks
Also known as abrasive sponges, they are similar in construction to a standard kitchen sponge but have a rough texture.
They are very easy to manipulate and bend, access to unusual shapes much easier. They are more durable than traditional sandpaper and can be used multiple times.
Sanding blocks are a common substitute for.
Emery Cloth
Emery cloth is most commonly for metal and is far more durable. They are sold in sheets or power tool rolls, the cloth backing prevents them from wearing down.
Although primarily used on metals, it can also be used on wood carefully
Sand And Leather
Start by sprinkling it over the area that is needed. To remove rough spots, gently rub the surface with a piece of leather or a dry cloth. This is a simple method that works best for lighting on a flat sur-face.
Walnut Shells
Walnut shells are often used in sandblasting and can abrade a sur-face in much the same way. The mussels must be ground into a coarse powder before rubbing the sur-face with a leather cloth. The downside to this method is that walnut shells are more expensive and harder to come by.
Pumice Stone
Pumice is a very rough volcanic rock that is often for removing dead skin. It is available in most stores and online in a variety of abrasion levels and is far more durable and will last much longer than leather.
With this technique, the area to be treated must be wet all the time
Can I Use A Nail File Instead Of Sandpaper Or Glass Nail Files Or Metal Nail Files?
Yes, depending on the size of the job, it is possible for a filer as an alternative to sandpaper, glass nail files, nail files emery or board nail files. Emery boards are a kind of filer made out of cardboard or wooden backing with glue to the top and bottom. Some have multiple sections of different grit to flatten the manicure.
If you are working on a small section in place of sandpaper as they are made of the same material.
However, larger areas will take too long given the size of the fingernail filer and the grit, which is usually superfine.
This fine grit is typically used to flatten a surface after it has been cleaned with a coarser.
Some steel filers have tiny metallic flakes attached to the sur-face that are small enough to smooth the sur-face of a manicure.
However, it’s important to remember that if you’re flattening something for a long period of time, a steel fingernail filer will get hot.
Alternatively, strips of metal are repeatedly cut at different angles to create a distinct abrasive grid.
This latter type would not be suitable for place of sandpaper as the ribs are not designed for wood usage.
Typically, this kind of grid pattern filer is intended on metal.
The reason is that wood can splinter if it gets caught in the tiny gaps between the cutters.
FAQs
I hope that finally you can make one fingernail file with other materials. If you need more ideas for making any things, ask us on powerpacplus.org.
