NETGEAR Router Login – Username, Password & Wifi IP Address
NETGEAR Router Login is a web interface that allows you to change the default password for security, locate your router’s IP address, change the Network Name (SSID), reset your router through the address http://192.168.1.1 or http://routerlogin.net.
What is NETGEAR router?

A Netgear router is a device that connects your home or office network to the internet by sending and receiving data packets. The device is linked to a modem, which sends data from your computer or other network devices into the router via an Ethernet cable.
This then sends it over radio waves via its antennae to another wireless access point (WAP) that can connect multiple computers at the same time.
Easy steps to NETGEAR router login
To access routerlogin.net or routerlogin.com, make sure your device is connected to the WiFi network of your NETGEAR routers. The default WiFi settings for your NETGEAR routers can be found on the back of the device. To NETGEAR Router Login, follow these steps:
- Enter 192.168.1.1 or routerlogin.net into the address bar of your browser.
- Click OK after entering the Username: admin and Password: password.

- You will have access to your NETGEAR router.
How to change NETGEAR Name (SSID) and WiFi Password?
To change the NETGEAR Name (SSID) and WiFi password on your Linksys router, simply follow the steps below. Here’s how to do it:
- Enter 192.168.1.1 or routerlogin.net into your browser.
- Enter admin for Username and password for Password.
- In the Wireless tab, fill in the Wireless Network Name (SSID) field.

- In Security Options, enter New password (Network Key) (WPA2-PSK).
- To save the changes, click Apply.
How to recover my NETGEAR admin password?
Here’s how to use the password recovery feature to recover your forgotten NETGEAR admin password:
- Join the NETGEAR WiFi network with your PC.
- Enter www.routerlogin.net or www.routerlogin.com into a web browser.
- A login page will be displayed.
- When you click Cancel, you will be taken to the Router Password Recovery page.
- You must enter the serial number of your router. It’s printed on a label in the back or under the router.
- Enter the router serial number and press the Continue button.
- You must now answer the security questions. If you are unable to answer the security questions, you must factory reset your router.
- Your admin password will be displayed on the screen after you correctly answer the security questions.
How to Change NETGEAR Router IP Address?
To Change NETGEAR Router IP Address, follow the below steps:
- You can use 192.168.1.1 or 192.168.0.1 to log in to the NETGEAR router settings page, or you can go to http://www.routerlogin.net or http://www.routerlogin.com.
- The Username is admin and the Password is password by default.
- Once you’re logged in, go to Advanced > Setup > LAN Setup from the menu on the left.
- You can find IP Address below LAN TCP/IP Setup. Change 10.10.10.1 to what you want.

- When you click “Apply Changes,” the system will restart to update the settings.
Note: The default gateway IP address is often changed to stop bad people from getting into your admin panel, stop DDoS attacks, or just add another layer of security.
Default password for NETGEAR nighthawk

Most products from NETGEAR:
- Username for all models: admin
- For current models, the password is: password
- Password for older models: 1234
NETGEAR ReadyNAS and ReadyDATA products:
- Username for all models: admin
- Password for ReadyNAS OS and ReadyDATA OS is password
- Password for RAIDiator firmware: netgear1
- Password for Infrant firmware: infrant1
NETGEAR fully managed switches:
- Username: admin
- Password: There is no default password for these products.
NETGEAR router reset for factory settings

To reset a NETGEAR router to its factory settings, follow these steps:
- Make sure your router’s power light is on.
- Turn your router over to find the Factory Reset button.
- Press and hold the Reset Button for 8 seconds with a sharp, thin object like a pin. The router will start to reset itself once you let go of the button.
- Wait a minute, then use the following default information to log in:
- Username: admin
- Password: password
We hope this article has shown you the way to set up your NETGEAR router. The above steps won’t waste much of your time to follow, you can also check them on any device like a phone or computer as long as they are connected to the internet.
If you have any questions, please leave your comments below so that PowerPACPlus can help you.